Metal Etching Stencils

YOU CAN PERMANENTLY ETCH ANYTHING METAL WITH YOUR COPY, TRADEMARK OR DESIGN IN SECONDS FOR PENNIES!

Home PageGlass Etching StencilsCraft StencilsMetal Etching StencilsCarton Printing StencilsAcrylic Paint StencilsQuilt Printing StencilsFabric Painting StencilsScrapbooking StencilsT-Shirt Printing StencilsLettering StencilsRefill SuppliesVideo TutorialsTestimonials & LinksFAQ - ARTWORK

HERE IS A REVOLUTIONARY NEW STENCIL MAKING IDEA!
Now You Can Make All Kinds Of Stencils With YOUR Copy, Artwork Or Designs In Minutes For Pennies!  And EACH STENCIL Can Be Used To Etch On Metal Or Glass And Even Print Or Paint On Hundreds Of DIFFERENT Materials Such As Wood, Plastic, Glass, Marble, Fabric, Paper, Cardboard, T-Shirts Or Anything Else That Will Accept Ink Or Paint!

See a Video about Metal Etching Below

 

     Below you will see how you can Quickly, Easily and Permanently Etch Anything Metal in just Seconds with stencils that you can make using your computer and software that you already have and one of the New Stencil Makers (Shown Below).  But please remember that the very same Stencil you use for Metal can Also be used to Etch, Print or Paint on Hundreds of other Materials and can be Used Over and Over Again!

Custom Etched Tool

This Is NEW And There Is Nothing Like It Available Anywhere On The Net.  You Can Be First To Explore All The Many Different Ideas These Universal Stencils Can Do.  Use Them For Your Craft or Hobby Projects, Or In Your Business Or Even START A NEW BUSINESS With These Easy To Make, Premium Quality Stencils!  Just Look Through This Website At Some Of The Hundreds Of Ways You Can Use YOUR TALENT And These New Stencils for FUN and PROFIT!

      Now Check On The Home Page To See How Easy It Is To Make These New Stencils And Then Check Back Here To See How You Can Use These New Stencils And Etch Anything Metal In Seconds Using The Etch-O-Matic Metal Etching System Explained Below! 

     With The New ETCH-O-MATIC Metal Etching System                                    You Can Etch into the surface of Anything Metal, including Tools, Instruments, Equipment or Metal Parts, anything that You can produce on your Computer and Expose on one of the New Universal Stencils described in this Website. This includes Names, Numbers, Designs, Logos, Trademarks or even Your Own Signature. Using an Electro- Chemical principle, the New ETCH-O-MATIC can Etch as Deep as .003" of an Inch in Less than 30 Seconds or Mark the Hardest Tool Steel and Carbides almost Instantly. It marks any Flat or Round Metal Surface down to 1/16" Diameter and any Metal Thickness from Thin Foil up to the Largest Castings easily. Most Marks (which look like Printing or Engraving) take about 3 to 20 Seconds (the Longer Dwell Times are for Deep Etching) and are Permanently Etched into the Metal.

The ETCH-O-MATIC is FAST and EASY TO USE And Anyone in Your Organization can become an EXPERT in JUST MINUTES and produce Professional Looking Marks Quickly. In Fact, Etch-O-Matic is by Far the Very Easiest Marking System to Learn that is Available Today!  Also, You will find that ETCH-O-MATIC is not only the Fastest way to make Permanent Marks on Anything Metal, but is by Far the LEAST EXPENSIVE method on the Market Today. Your Marks will Cost just Fractions of a Cent to Produce and You will be Extremely Pleased with the Result.

2 Free E-Books On How To Make Money On EBay & Craigslist!
We want to help all of our customers use their Ideas and Talent to make Extra money during these tough times so we are offering You 2 Free E-Books To help You sell your Crafts or Products.

Click on the Shopping Cart Link below
Fill out the required info and you're on your way!
NOTE: There is No Catch to this…it's Free

Download Your 2 Free E-Books
 

We Never Sell Your Email to Any List - They are kept Private.

Watch a video Explaining The Metal Etching Process Below

 

Custom Etched Saw Etched Tools Etched Knife Etched Tools

  Above Are Permanent Marks On Tools YOU Can Make In Seconds!

How Does It Work?
It just doesn't get any Easier than this. You simply use your computer to create whatever trademark, logo, or text you want to etch on your metal pieces. You are limited by nothing but your imagination. Print your design onto a transparency (Included in the kit!). Then use one of the New Stencil Makers (Which are shown below) to turn the transparency into a stencil in just 3 - 5 minutes.   Now you have a  Premium Quality Stencil that can be reused Hundreds of times to Permanently Etch anything metal including knives, tools, instruments, metal parts and more for less than a cent per mark.   To Find Out More On Etch-O-Matic Click Here on Metal Etching

 

         Here Is The Quick, Easy And Inexpensive Way To Mark      Your Tools, Metal Parts, Equipment Or Even A Knife.
         First Make Your Artwork On Your Computer And Make A Stencil As Shown on                the Home Page On This Website. When Finished It Should Look Like This One. 
         Custom Stencil Ready for Etching      
Next Place The Stencil On Your Tool, Part Or Knife Blade And Use a
Small Piece Of Scotch Tape To Hold It In Position.  

Line Up Stencil On Metal

When Ready Wet The Head Of The Etch-O-Matic With Electrolyte And
Place It On The Stencil.  After Everything Is Lined Up Correctly Just 
Touch The Blade With The Ground Wire (Shown With Alligator Clip)
For A Few Seconds And Your Mark Is Complete.

Etch-O-Matic Machine

Here Is Your Mark.  It Is Black On Stainless Steel But You Can Also Make
Deep Etch Marks Down To About .003" And They Can Be "Clear" Or Black.

Finished Metal Etching

Now You Can See Just How Easy It Is To Put Your Own Mark On
Anything Metal Including Tools, Parts, Instruments Or Even Knives. 

How To Etch Anything Metal In Seconds!
Etched Stainless Steel Travel Mug Here we are Etching a Stainless Steel Travel Mug but it could be  Anything else Made of Metal.  We are going to put a custom design on it just to show how Quick and Easy it is.  There are complete Instructions on the Home Page on how to create your custom stencil. After you make your stencil then follow the steps below.
1. Make a Universal Stencil.
Start with a Universal Stencil First simply create any text copy, design or artwork on your computer and print it out on a transparency film in your kit.  Then use the transparency and one of the Stencil Makers show below to "Expose" the stencil.  Next develop and dry it and you will have a stencil ready to make dozens or even hundred of marks.
2. Secure The Piece To Be Etched.
Secure the Piece to be Etched Place your travel mug, or what ever you are etching, in a secure position so it won't roll around while you etch. You can use our Universal Holder (available here) or your own system.
3. Position The Stencil.
Position the Stencil Position the stencil on the metal to be etched. Be very careful with the alignment of your stencil and line up your copy exactly where you want the etch to go. Use Scotch tape to secure the stencil to the metal surface.
4. Prepare Etch-O-Matic.
Prepare Etch-O-Matic for Etching Use the electrolyte solution in your kit to wet the pad of the Etch-O-Matic unit. This is the chemical that creates the etch (Electrolyte) when a very small electric charge is passed through it.  Electric charge is so little you can NOT feel it. (10 Volts and 1 Amp.)
5. Apply Etch-O-Matic to stencil.
Apply Etch-O-Matic to Stencil Clip the alligator clip  on the ground wire to a metal edge of the travel mug or just touch it and make sure the Etch-O-Matic unit is plugged in. Apply the wet pad of the Etch-O-Matic to the copy part of your stencil.  If the surface is curved, you can Roll the Etch-O-Matic in order to contact all of the surface and in Seconds it is Permanently Etched.
6. Enjoy Your Etching!
Travel Mug Etched with Your Stencil   It's that simple! Just remove the stencil and wash off any extra electrolyte.  Dry the metal, and enjoy your permanently etched, custom designed metal item!  (Note:  We have many customers that use this idea and sell a lot of Travel Mugs that they can quickly personalize.)

  To find out more about etching metal click on Etch-O-Matic  You will find a world of information on etching anything metal in seconds.  But please do not forget that these very same stencils will now also Etch Glass, or Print or Paint on Almost Anything so you will have a Multi-Purpose Universal Stencil which can be used for Thousands of different jobs or projects for Fun and Profit.  Also You will need to use the Back Button to get back to this website.

Special Today!

 If You want to Etch Metal and Make Stencils For Printing or Painting     almost Anything else then check out the "Combo Kits" Below. 

Here are several Metal Etching/Stencil Making Kits
 

     NEW - We Just Made Some Helpful
Video Tutorials
For The Stencil Maker Kits
And How To Make Stencils
Click Button On The Menu Or Here!
 

Mark 440 Combination Kits
These Are Kits That Give You The Mark 440 U.V. Exposure Unit And Also
Includes Either the Etch-O-Matic Starter Kit, Super Kit, or Super Industrial Kit.
 This Unit Makes Makes Stencils 4"x 5".

Mark 440 Metal ETCHING Combo Kit.......Contents:

Mark 560 Stencil Making Combo Kit.

Starter Combo includes everything in the Mark 440 Stencil Maker, Plus  Etch-O-Matic Starter Kit  Regular Price $299.95
 Special Price Today $279.95 

Super Combo comes with everything in the Mark 440 Stencil Maker, Plus the Etch-O-Matic Super Kit
Special Price Today $419.95

Super Industrial Combo comes with everything in the Mark 440 Stencil Maker, Plus Etch-O-Matic Super Industrial Kit Regular Price $499.95. Special Price Today $479.95

Mark 680 Metal ETCHING Combo Kit.......Contents:Mark 680 Stencil Making Combo Kit

Starter Combo includes everything in the Mark 680 Stencil Maker, Plus  Etch-O-Matic Starter Kit  Regular Price $399.95
Special Price Today $359.95

Super Combo comes with everything in the Mark 680 Stencil Maker, Plus the Etch-O-Matic Super Kit       Regular Price $499.95
Special Price Today $479.95

Super Industrial Combo comes with everything in the Mark 680 Stencil Maker, Plus Etch-O-Matic Super Industrial Kit   Regular Price $599.95. Special Price Today $509.95

Mark 1000 Metal ETCHING Combo Kit......Contents:

Mark 1000 Stencil Making Combo Kit.'

Starter Combo includes everything in the Mark 1000 Stencil Maker, Plus the Etch-O-Matic Starter Kit - Regular Price $439.95
Special Price Today $419.95 

Super Combo comes with everything in the Mark 1000 Stencil maker, plus the Etch-O-Matic Super Kit - Regular Price $599.95
Special Price Today $539.95

Super Industrial Combo comes with everything in the Mark 1000 Stencil Maker, Plus the Etch-O-Matic Super Industrial Kit  Regular Price $649.95. Special Price Today $635.95

 

  Here Are Three Of the Most Popular Metal Etching Kits.

To Learn More About These Kits Please Click On:

http://www.etch-o-matic.com/

Etch-O-Matic Starter Kit

ETCH-O-MATIC STARTER KIT

  • ETCH-O-MATIC Marker with Standard Head Marking Size 7/8" x 13/4"
  • Electrical cord
  • Ground plate
  • 2 oz. Electrolyte solution in plastic bottle
  • 10 special stencils
  • Neutralizer Pak
  • Deep Etching Adapter Clip
  • Complete Instructions
  • Special Today $ 95.95
  • ORDER NOW

Etch-O-Matic Super Kit

ETCH-O-MATIC SUPER KIT

  • ETCH-O-MATIC Marker with 2"x4" or larger head
  • Electrical cord
  • Ground plate
  • 8oz. Electrolyte solution in plastic bottle
  • 8oz. Neutralizer solution in plastic bottle
  • 100 pack special stencils
  • Extra Pads
  • Deep Etching Adapter Clip
  • Complete Instructions
  • Packed in Sturdy Plastic Carrying Case
  • Special Today $ 279.95
  • ORDER NOW

Etch-O-Matic Super Industrial Kit

ETCH-O-MATIC SUPER INDUSTRIAL KIT

  • 1 Super and 1 Regular
  • Electrical cord
  • Ground plate
  • 8oz. Electrolyte solution in plastic bottle
  • 2-100 pack special stencils
  • 4oz. Aluminum Black Oxide, Brass, Copper & Bronze Electrolyte
  • 8oz. Neutralizer 
  • Deep Etching Adapter Clip (each unit)
  • Complete Instructions
  • Packed in Sturdy Plastic Carrying Case
  • Special Today $ 379.95
  • ORDER NOW
Each kit will make Approximately 1,000 marks before the supplies need to be Refilled. The unit comes standard 110 Volts, but you can purchase a 220 Volt upgrade for an additional $20.

Site Map

Martronics can help you make art stencils, craft stencils,
custom stencils, paint stencils and design stencils.

Martronics Corporation
PO BOX 200/500 Wilcox RD, Salkum, WA 98582
Ph:800-775-0797 Fax:360-985-2996
Email - Click Here